AMAT Applied Materials 0100-99007控制器模块
1.产 品 资 料 介 绍：
关键技术参数
功能特点
典型应用场景
选型与使用建议
AMAT Applied Materials 0100-99007控制器模块 英文资料：
AMAT Applied Materials 0100-99007 is a high-performance, modular industrial controller module mainly used for real-time monitoring and closed-loop control of multiple parameters in semiconductor and related manufacturing equipment. It is compatible with multiple communication protocols and I/O interfaces to ensure the stability and accuracy of the production process.
Key technical parameters
Project Indicator Description
Control core 32-bit RISC processor+floating-point arithmetic unit supports PID, cascade, feedforward and other algorithms
Memory 16 MB SDRAM, 32 MB Flash can store a large amount of recipes and logs
Supply voltage 24 VDC (± 10%) industrial standard power supply
Power consumption ≤ 8.5 W (non fault-tolerant) low-power design
Working temperature -20~60 ℃, suitable for general industrial environments
Communication interface Ethernet (10/100 Mbps), RS-232/485, USB 2.0 supports remote monitoring and firmware upgrade
I/O expansion can be configured with modular design for digital, analog, high-speed counting, and other modules, allowing for flexible expansion
Communication protocols Modbus TCP/RTU, EtherNet/IP, OPC UA compatible with mainstream SCADA/PLC systems
Safety features include optocoupler isolation, overvoltage/overcurrent protection, and watchdog to improve system reliability
Features
High precision closed-loop control: capable of simultaneously controlling multiple physical quantities such as temperature, pressure, flow rate, gas concentration, etc., with a control cycle as short as 100 ms.
Multi protocol communication: supports multiple industrial buses, making it easy to integrate with upper computers or other devices.
Modular structure: Supports hot swapping, easy maintenance, and can be quickly replaced or upgraded.
Data recording and tracing: Equipped with a large capacity Flash, it can store historical data for process optimization and troubleshooting.
Redundancy design (optional): Supports dual power supply and dual communication link redundancy to improve system availability.
Typical application scenarios
Semiconductor manufacturing (etching, deposition, cleaning, etc.)
Flat panel display (LCD, OLED)
Photovoltaic cell production
vacuum coating
Laboratory Automation and Testing Equipment
Selection and usage suggestions
Clear control objects and parameters: Determine the physical quantities (such as temperature, pressure, flow rate) and accuracy requirements that need to be monitored and controlled.
Matching communication protocol: ｓｅｌｅｃｔ the corresponding communication interface and protocol (such as EtherNet/IP or Modbus TCP) based on the existing system.
Plan I/O points: ｓｅｌｅｃｔ appropriate I/O expansion modules based on the number of sensors and actuators on site.
Pay attention to environmental conditions: Ensure that the temperature and humidity at the installation location are within the working range, and avoid strong electromagnetic interference.
Regular maintenance: Regularly backup configuration and data, check heat dissipation and power status to ensure long-term stable operation.
AMAT Applied Materials 0100-99007控制器模块 产品展示
产品视频
3.其他产品
Emerson 1C31181G02 输入/输出模块
WESTINGHOUSE 1C31179G02 遥控 I/O 模块
MITSUBISHI Q06HCPU逻辑控制器
4.其他英文产品
TOSHIBA USIO21 serial port module
5SHY35L4520 5SXE10-0181 AC10272001R0101 Thyristor module
AUTOMATIONX AXLINK100 892.202988 module
| 720-23475-001 | 8030-ROM-122 | X-AO 16 51 |
| 720-23461-000 | CACR-SR20BB1AM | X-AO 16 01 |
| 720-21901-003 | 6SC6103-0SG31 | X-DO 12 51 |
| 712-404056-00 | 6SC9811-4BF10 | X-DO 12 02 |
| 710-806051-01 | 6DD1683-0CH0 | X-DO 24 02 |
| 710-806050-01 | 8020-SCP-424 | X-DO 24 01 |
| 710-805314-00 | 8020-SCP-423 | X-DO 32 51 |
| 710-805000-50 | 8020-SCP-401 | X-DO 32 01 |
The content is from Ruichang Mingsheng Automation Equipment Co., LTD
Contact: +86 15270269218
