Motorola  33EW5089 64-W5091B01-D串行端口模块

1.产 品 资 料 介 绍：

Motorola 33EW5089 / 64-W5091B01-D VME 串行端口模块解析

一、核心技术特性

1. 多类型串行接口与传输能力
   支持多路 RS-232、RS-422、RS-485 串行通信接口（通道数量依版本适配），覆盖工业场景主流串行设备需求：
   • RS-232 适配近距离外设（如本地调试终端、小型传感器）；
   • RS-422/485 支持差分信号传输，抗干扰能力强，传输距离可达 1200 米，适配车间远端执行器、铁路沿线传感器等远距离设备；
     同时支持全双工（双向同时传输）与半双工（双向交替传输）模式，可根据外设通信协议灵活切换，满足不同数据交互需求。
2. 高速低延迟通信性能
   具备高速数据收发能力，支持多种标准波特率（最高适配工业常用高速率需求），且通信延迟低，能快速响应主控指令与外设数据反馈，避免因通信滞后影响系统实时性，适配工业控制、电力保护等对 “数据时效性” 要求高的场景。
3. VME 总线深度兼容
   配备标准 VME 总线接口，可作为从模块与 VME 系统中的主控板（如 MVME-162、MVME-320B）无缝集成：
   • 通过 VME 总线接收主控单元的通信控制指令，同步上传外设数据；
   • 支持 VME 中断响应，可将 “数据接收完成”“通信故障” 等事件主动上报主控，保障系统对通信状态的实时监控。
4. 工业级环境适应性
   采用工业级硬件设计，耐振动、抗电磁干扰（符合 IEC 61000-4 电磁兼容标准），工作温度覆盖工业级范围，能适应车间振动、电力变电站强电磁环境、铁路沿线温度波动等恶劣条件，支持 7×24 小时连续运行，满足关键系统 “长期稳定通信” 需求。
5. 软件与系统兼容
   兼容 VxWorks、OS-9 等主流实时操作系统，可与主控单元的操作系统无缝协同，便于开发人员通过标准软件接口配置通信参数（如波特率、数据位、校验方式），降低程序开发与移植门槛，无需额外定制驱动即可快速投入使用。

Motorola 33EW5089 64-W5091B01-D串行端口模块  英文资料：

Analysis of Motorola 33EW5089/64-W5091B01-D VME Serial Port Module

Motorola 33EW5089/64-W5091B01-D is an industrial grade serial port module designed specifically for VME systems. Its core positioning is the "multi-channel serial communication expansion unit" - by providing multiple standard serial interfaces, it expands the device connection capability of VME main control units (such as single board computers and controllers), realizes reliable data transmission and reception with external devices, and is a key component for ensuring stable serial communication in industrial control, transportation, power and other scenarios.

1、 Core technical characteristics

Multi type serial interface and transmission capability

Supports multiple RS-232, RS-422, RS-485 serial communication interfaces (the number of channels is adapted according to the version), covering the mainstream serial device requirements in industrial scenarios:

RS-232 adaptation for close range peripherals (such as local debugging terminals, small sensors);

RS-422/485 supports differential signal transmission, with strong anti-interference ability and a transmission distance of up to 1200 meters. It is suitable for remote devices such as workshop actuators and railway line sensors;

Simultaneously supporting full duplex (bidirectional simultaneous transmission) and half duplex (bidirectional alternating transmission) modes, it can flexibly switch according to peripheral communication protocols to meet different data exchange needs.

High speed and low latency communication performance

Capable of high-speed data transmission and reception, supporting multiple standard baud rates (up to the highest required industrial high-speed rate), with low communication latency, able to quickly respond to main control instructions and peripheral data feedback, avoiding the impact of communication lag on system real-time performance, and adapting to scenarios with high "data timeliness" requirements such as industrial control and power protection.

VME bus deep compatibility

Equipped with standard VME bus interface, it can seamlessly integrate with the main control board (such as MVME-162, MVME-320B) in the VME system as a slave module:

Receive communication control instructions from the main control unit through the VME bus and synchronously upload peripheral data;

Support VME interrupt response, actively report events such as "data reception completed" and "communication failure" to the main control, ensuring real-time monitoring of communication status by the system.

Industrial grade environmental adaptability

Adopting industrial grade hardware design, it is resistant to vibration and electromagnetic interference (compliant with IEC 61000-4 electromagnetic compatibility standard), with working temperature covering the industrial grade range. It can adapt to harsh conditions such as workshop vibration, strong electromagnetic environment in power substations, and temperature fluctuations along railways. It supports 7 × 24-hour continuous operation and meets the "long-term stable communication" requirements of key systems.

Software and system compatibility

Compatible with mainstream real-time operating systems such as VxWorks and OS-9, it can seamlessly collaborate with the operating system of the main control unit, making it easy for developers to configure communication parameters (such as baud rate, data bits, and verification methods) through standard software interfaces, reducing the threshold for program development and porting, and enabling quick deployment without the need for additional custom drivers.

Motorola 33EW5089 64-W5091B01-D串行端口模块 产      品      展      示      

 产品视频

3.其他产品

DCS800-S02-0680-04/05直流调速器
AB 20P41AD412RA0NNN直流驱动器
IS200EHPAG1A脉冲放大器板

4.其他英文产品

DS200SIOBH1ACA steam turbine card
KEBA FB201 Extensible modules
KEBA IP706 Extensible modules

The content is from Ruichang Mingsheng Automation Equipment Co., LTD

Contact: +86 15270269218