AMAT Applied Materials 0190-07502电源模块
1.产 品 资 料 介 绍：
- 输入适配 100-240V AC 宽压，输出为直流（推测 12V/24V/48V 可选），额定功率覆盖 50-200W，采用 PWM 稳压技术，输出精度 ±0.5%，纹波≤50mV，为半导体设备敏感组件提供稳定洁净电源。
- 转换效率≥90%，空载损耗≤1.5W，低功耗设计适配设备长期运行，减少能耗与散热压力。
- 配备端子式输出接口，可直接对接 AMAT 0190-24007 单板计算机、0100-09008 气动控制板等组件，无需额外转接。
- 支持 RS485 通信（Modbus 协议），可与设备主控系统联动，实时上传电压、电流数据，便于远程监控电源状态。
- 集成过压（120% 额定电压触发）、过流（150% 额定电流切断）、短路、过温（≥85℃断电）四重保护，故障时快速告警并锁定输出，避免损坏下游设备。
- 输入输出隔离电压≥2500V DC，抗电磁干扰符合 EN 55022 Class B，适配半导体车间复杂电磁环境。
- 工业级元件选型，经 - 40~+85℃高低温老化测试，MTBF≥10 万小时，支持 7×24 小时连续运行。
- 符合 UL/CE/RoHS 认证，原厂提供 1-3 年质保，备件可快速替换，降低设备停机维护成本。
AMAT Applied Materials 0190-07502电源模块 英文资料：
1. Power Supply Performance (AMAT 0190-07502)
The input is compatible with a wide voltage range of 100-240V AC, and the output is DC (estimated to be 12V/24V/48V optional). The rated power covers 50-200W, and PWM stabilization technology is used. The output accuracy is ± 0.5%, and the ripple is ≤ 50mV, providing stable and clean power for sensitive components of semiconductor equipment.
Conversion efficiency ≥ 90%, no-load loss ≤ 1.5W, low-power design suitable for long-term operation of equipment, reducing energy consumption and heat dissipation pressure.
2. Adaptation and linkage (AMAT 0190-07502)
Equipped with a terminal output interface, it can directly interface with AMAT 0190-24007 single board computer, 0100-09008 pneumatic control board and other components without the need for additional adapters.
Supports RS485 communication (Modbus protocol), can be linked with the device main control system, real-time upload voltage and current data, and facilitate remote monitoring of power status.
3. Safety and Protection (AMAT 0190-07502)
Integrated overvoltage (triggered by 120% rated voltage), overcurrent (cut off by 150% rated current), short circuit, and over temperature (power-off at ≥ 85 ℃) quadruple protection, quickly alarms and locks the output in case of faults, avoiding damage to downstream equipment.
Input/output isolation voltage ≥ 2500V DC, anti electromagnetic interference meets EN 55022 Class B, suitable for complex electromagnetic environments in semiconductor workshops.
4. Reliability (AMAT 0190-07502)
Industrial grade component selection, tested for high and low temperature aging at -40~+85 ℃, MTBF ≥ 100000 hours, supporting 7 × 24-hour continuous operation.
Compliant with UL/CE/RoHS certification, the original factory provides a 1-3 year warranty, and spare parts can be quickly replaced to reduce equipment downtime maintenance costs.
AMAT Applied Materials 0190-07502电源模块 产品展示
产品视频
3.其他产品
PPD512A10-150000 3BHE040375R1023控制器
UAD155A0111 3BHE029110R0111 驱动器
UAD149A11 3BHE014135R011激励系统控制器
4.其他英文产品
VMIVME-7750-734001 gas turbine electric card
YASKAWA CPS-150F Control the mainboard
YASKAWA JANCD-XCP01-1 Teaching module
| AMAT 0100-00793 | AMAT 0190-09469 | AMAT 0190-20085 |
| AMAT 0100-76042 | AMAT 0190-09470 | AMAT 0190-20086 |
| AMAT 0100-77017 | AMAT 0190-35497 | AMAT 0190-20096 |
| AMAT 0100-20100 | AMAT 0190-35510 | AMAT 0190-20096 |
| AMAT 0100-00022 | AMAT 0190-35511 | AMAT 0190-20130 |
| AMAT 0090-02233 | AMAT 0190-35512 | AMAT 0190-20132 |
The content is from Ruichang Mingsheng Automation Equipment Co., LTD
Contact: +86 15270269218
