AMAT Applied Materials  0010-47882控制器

1.产 品 资 料 介 绍：

核心规格

功能与价值

• 稳定高速通信：DNET 接口确保数据无失真、低延迟，适应多子系统并发控制。
• 模块化维护：插卡式设计，可在线更换，缩短停机时间。
• 多系统适配：同一硬件可兼容多种晶圆处理平台，降低备件成本。
• 安全可靠：支持冗余电源与故障诊断，保障长时间稳定运行。

安装与维护

1. 安装
   • 断电后插入背板对应插槽，按原方向固定，确保连接器接触良好。
   • 先接控制信号，后接电源，防止瞬间冲击。
2. 更换要点
   • 新模块需加载原设备配置文件，确保 DNET 地址、控制参数一致。
   • 更换后进行原点校准、互锁测试及功能试运行。
3. 维护
   • 定期检查指示灯状态、散热风扇运转及供电电压。
   • 每 6–12 个月进行一次功能自检，确保通信无丢包、无延迟。

AMAT Applied Materials  0010-47882控制器 英文资料：

AMAT 0010-47882 is a dedicated digital network controller module for the AXIOM ACP platform, Rev 02， Commonly found in semiconductor devices such as Centura and Endura, responsible for high-speed digital communication and logic control with subsystems such as transmission, process, and detection.

Core specifications

Project specifications/characteristics remarks

Type: Digital network controller (PCB plug-in card) Non independent chassis controller

Communication interface DNET (Digital Network, Application Material Internal Bus) high-speed synchronous data transmission

Suitable for platform AXIOM ACP, some Centura/Endura systems, and backplane slot matching

Functional equipment logic control, timing coordination, status monitoring, and core components of the main control system

Power supply 24 VDC ± 5% dual redundant power supply optional

Industrial environment design with working temperature range of 0 ℃ -50 ℃

Version Rev 02 Common versions

function and value

Stable high-speed communication: The DNET interface ensures data distortion free, low latency, and adapts to concurrent control of multiple subsystems.

Modular maintenance: plug-in card design, can be replaced online, reducing downtime.

Multi system adaptation: The same hardware can be compatible with multiple wafer processing platforms, reducing spare parts costs.

Safe and reliable: Supports redundant power supply and fault diagnosis, ensuring long-term stable operation.

Installation and maintenance

install

After power off, ｉｎｓｅｒｔ the corresponding slot on the backplane and fix it in the original direction to ensure good contact of the connector.

Connect the control signal first, then the power supply to prevent momentary impact.

Key points for replacement

The new module needs to load the original device configuration file to ensure consistency in DNET address and control parameters.

Perform origin calibration, interlock testing, and functional trial operation after replacement.

maintenance

Regularly check the status of the indicator lights, the operation of the cooling fan, and the power supply voltage.

Perform a functional self check every 6-12 months to ensure no packet loss or delay in communication.

AMAT Applied Materials  0010-47882控制器 产品展示      

 产品视频

3.其他产品

GJR2390200R1010控制卡
GJR2312200R1010数字 I/O 模块
GJR2385200R1010控制器模块

4.其他英文产品

AMAT 0100-09237 Matrix switch card
AMAT 0100-09156 Multi-function I/O card
AMAT 0100-09126 Serial control card

The content is from Ruichang Mingsheng Automation Equipment Co., LTD

Contact: +86 15270269218