AMAT Applied Materials  DIP-360-002模拟PCB板

1.产 品 资 料 介 绍：

核心规格

功能与价值

• 高精度信号处理：优化布线与阻抗匹配，减少失真与漂移。
• 抗干扰能力强：关键通道隔离，适应复杂电磁环境。
• 模块化设计：便于维护与更换，缩短停机时间。
• 兼容性高：同一硬件可兼容多种设备模块。

安装与替代要点

1. 安装
   • 确保安装孔位与背板连接器匹配，按原方向安装。
   • 信号与电源线分开布线，使用屏蔽线并良好接地。
2. 替代验证
   • 若需替代，需确认引脚定义、信号类型及电气规格一致，并进行空载与负载测试。
   • 建议优先采用 AMAT 原装或认证替代件。
3. 维护
   • 定期检查连接器插针是否氧化或松动，防止接触不良。
   • 每 6–12 个月进行功能测试，确保信号传输质量。

AMAT Applied Materials  DIP-360-002模拟PCB板 英文资料：

AMAT DIP-360-002 is a 360 pin dual in line (DIP) analog signal processing PCB board used by Applied Materials for semiconductor devices. It is mainly used for sensor signal conditioning, power distribution, and analog control, and is commonly found on platforms such as P5000, Centura, Endura, etc.

Core specifications

Project specifications/characteristics remarks

Type: Multi layer rigid analog signal PCB 4-8 layers, high-speed/high-density wiring

DIP-360 (360 pin) two column direct insertion connector with pin packaging

Substrate FR-4 or high Tg material with stable size and heat resistance

Surface treatment ENIG (chemical nickel/immersion gold) has excellent weldability and oxidation resistance

Signal type sensor, analog input/output, control signal support differential and single ended

Isolation channel optocoupler/transformer isolation anti-interference ≥ 1500 Vrms

Process copper PTH, blind/buried hole, precision etching support for 0.3mm micropores

Application of wafer transfer robots, automatic material handling (AMH) system signal conditioning, and I/O expansion

function and value

High precision signal processing: optimizing wiring and impedance matching to reduce distortion and drift.

Strong anti-interference ability: key channel isolation, adaptable to complex electromagnetic environments.

Modular design: easy to maintain and ｒｅｐｌａｃｅ, reducing downtime.

High compatibility: The same hardware can be compatible with multiple device modules.

Installation and replacement points

install

Ensure that the installation holes match the backplane connectors and install in the original direction.

Separate the signal and power lines for wiring, use shielded wires, and ensure good grounding.

Alternative verification

If substitution is required, it is necessary to confirm that the pin definition, signal type, and electrical specifications are consistent, and conduct no-load and load tests.

It is recommended to prioritize using AMAT original or certified replacement parts.

maintenance

Regularly check whether the connector pins are oxidized or loose to prevent poor contact.

Perform functional testing every 6-12 months to ensure signal transmission quality.

AMAT Applied Materials DIP-360-002模拟PCB板 产品展示      

 产品视频

3.其他产品

GJR2312200R1010数字 I/O 模块
GJR2385200R1010控制器模块
GJR2395400R1010 83SR06C-E控制板

4.其他英文产品

AMAT 0100-09156 Multi-function I/O card
AMAT 0100-09126 Serial control card
AMAT 0100-09117 Multi-function I/O card

The content is from Ruichang Mingsheng Automation Equipment Co., LTD

Contact: +86 15270269218